Contact RICHLINCO
40 Allen Boulevard
Farmingdale, NY 11735
Tel: (631) 694-9400
info@richlinco.com

Set Up Hard Drive on OmniTurn G4 CNC Lathe

 

Set Up Hard Drive on OmniTurn G4 CNC Lathe

Set Up Hard Drive on OmniTurn G4 CNC Lathe

Follow these instructions on your Omniturn G4 control to set up your hard drive:

  1. Put USB stick that came with machine into usb port
  2. Power up; press del to start cmos setup
  3. Set boot sequence to boot off usb stick
  4. Save & exit; on reboot, usb stick will be c: drive, new hard drive will be d: drive
  5. Log onto c: (usb stick)
  6. Run makehd to format hard drive
  7. Power down; remove usb
  8. Power up; should be ok.

 

© 2018 Richlin Machinery Inc. Richlin Machinery, Inc. Click here for directions
40 Allen Blvd. Farmingdale, New York 11735
Tel: (631) 694-9400 | Fax: (631) 694-9415 | info@richlinco.com